H-PU Thermoplastic Polyurethane

Extremely good abrasion and extrusion resistant seal material.
Easy fitting due to high elasticity properties.
Excellent Hydrolysis Resistance.
Hardness 95 Shore A
Temperature Range -25c to 110c
Application Standard hydraulic applications up to 400 bar.
Colour Red

NBR Nitrile Butadiene Rubber

Abrasion resistant seal material.
High elasticity means easy installation.
Hardness 85 Shore A
Temperature Range -35c to 100c
Application Standard hydraulic and Pneumatic applications up to 250 bar.
Colour Black

H-NBR Hydrogenated Acrylnitrile Butadiene Rubber

Abrasion resistant seal material.
High elasticity means easy installation.
Hardness 85 Shore A
Temperature Range -20c to 150c
Application Standard hydraulic and Pneumatic applications up to 250 bar.
Colour Green

VITON Fluorine Rubber (FPM)

Abrasion resistant to heat and chemicals.
High elasticity means easy installation.
Hardness 85 Shore A
Temperature Range -20c to 200c
Application Standard hydraulic and Pneumatic applications up to 250 bar.
Colour Brown

EPDM Ethylene Propylene Diene Rubber

Highly resistant to weathering, ozone and aging.
Not resistant to mineral oils.
High elasticity means easy installation.
Hardness 85 Shore A
Temperature Range -40c to 150c
Application Hot water, steam, caustics, and diluted acids.
Peroxide cured suitable for brake fluid.
Colour Black

Silicon Methyl Vinil Silicon Rubber (MVQ)
Highly resistant to weathering, ozone and aging.
High electrical insulation properties.
High elasticity means easy installation.
Hardness 85 Shore A
Temperature Range -60c to 220c
Application Standard hydraulic and Pneumatic applications up to 250 bar.
Colour Blue

TFV PTFE Virgin
Excellent chemical resistance.
Low frictional properties
Can be used in contact with food
Temperature Range -200c to 260c
Application Back up rings, glide rings, wear bands, and seals.
Colour White

TMB PTFE + Glass, Bronze, MoS2
Excellent chemical resistance.
Low frictional properties
Extremely good extrusion resistance
Temperature Range -200c to 260c
Application Glide rings, wear bands, and seals.
Colour Grey

POM Polyoxymethelene
High pressure and extrusion strength.
Low moisture absorption.
Temperature Range -40c to 100c
Application Wear bands, back up rings, and bushes
Colour White

PA Polyamide
High pressure and extrusion strength.
Lower moisture absorption than most PA’s.
Special grade for seal manufacturing.
Temperature Range -40c to 100c
Application Wear bands, back up rings, and bushes
Colour Black